The substrates must be clean, even, dry, free of dust, oil, grease and any contaminants that could harm bonding. All traces of poorly adherent paints or coatings should be systematically removed beforehand. Clean the substrates with DAYSONNET 683, methylethylketone (MEK), acetone or degreaser DAYSON 1001. Check the compatibility of the solvent used with the substrates. If necessary, rub down metal surfaces beforehand. Clean them after rubbing down. Allow the substrates to dry after degreasing. If necessary, apply a primer.Not: when using solvents, extinguish all sources of ignition and carefully follow the safety and handling instructions given by the manufacturer or supplier. We recommend to clean concrete with a metal brush.

DAYSON UNIVERSAL can be applied by a manual or pneumatic gun. After application, each joint should be smoothed out using a wet and soapy plastering knife. This product should be used within 24 hours of opening the cartridge or sausage; otherwise the sealant could harden inside. If applied in cold weather, store the packagings at about 20°C before use. Do not apply on silicones or in the presence of cured silicones. Avoid contact with alcohols and solvents during curing.

Tools should be cleaned with DAYSONNET 683, MEK or acetone before the sealant has completely cured. After curing, abrasion is necessary.

Harmful. Read the material safety data sheet before use.

The technical data contained herein is based on our present knowledge and experience and we cannot be held liable for any errors, inaccuracies, omissions or editorial failings that result from technological changes or research between the date of issue of this document and the date the product is acquired.

Before using the product, the user should carry out any necessary tests in order to ensure that the product is suitable for the intended application.

Moreover, all users should contact the seller or the manufacturer of the product for additional technical information concerning its use if they think that the information in their possession needs to be clarified in any way, whether for normal use or a specific application of our product.

Our guarantee applies within the context of the statutory regulations and provisions in force, current professional standards and in accordance with the stipulations set out in our general sales conditions. The information detailed in the present technical data sheet is given by way of indication and is not exhaustive. The same applies to any information provided verbally by telephone to any prospective or existing customer.